The usual addition of panel lines on some of the parts.

Also added pla strips and metal beads for extra details and depth.

Got no choice but to mask the knees and ankle parts.

Reshaping of the shoulder armors done, primed and sanded for the imperfections. Will just add vents on the side later.

I also fixed the chest and vents due to some damages using putty and pla plates.

Did some cuts on the thighs to provide more mobility.

Kindda burn out of modeling. So I decided to do a simple and fun build out of scraps that I have. I'll be making my own version of the G3 Gundam using scraps from my HGUC RX-78, RX-178 MK2 and GM Quel.

Preparing some parts for some pre-painting modifications. Just Simple cuts and trim here and there.

I also want the shoulder armor to be a bit bulkier to fit the proportion of the MK2 and Quel parts. Did this using pla-plates and slowly building up the layers.

My 2nd attempt on armor model kits. Again I have learned new things about weathering and Im pretty satisfied with the results. The build is pretty much OOTB, with an Afrika Korps color scheme. Enjoy!

Like the filter, I also used two colors for the drybrushing. First is light yellow then followed by dark gray on selected areas. Still have to tone it down a bit. I also did some paint chippings and rust. One more layer of light dusting on the lower hull and wheels and its done.

1st, I used a light gray....

then followed by brown.

Here's a small update. Decals were applied and sealed with a semi-gloss coat. After curing I applied a dark brown wash to raise some details of the kit. I also hand-painted some of the details using Tamiya enamels.

After fixing and replacing the worn out bushing of my old and trusty compressor... painting time!

The kit was primed with Mr. Surfacer 1000, then highlighted the edges, rivets etc. with dark gray.

Applied the base color which produced a subtle shade.

After drying and curing, I applied two lighter shades of the base coat as highlight and to show gradation.

This project was inspired by NGT's HGUC Zaku build. I reshaped the torso area to make it a bit bulkier. Also did some armor cuts and separation on the skirts. I also extended the thighs by 2.5mm and did some articulation mods on it. The usual panel lines and small pla-strips were added for detailing purposes. I also modify the backpack, by adding after market thrusters. o-bolts and pla plates. More pics at the main site -- Mechaion Designs

Construction of the turret and bulletproof plate.

At last, done with the assembly stage! Now the fun stuff begins!

after fixing the suspensions in place.

upper hull was fixed too, there were some seam that needs some putty work. Wheels were dry-fitted to check proper alignment.

construction of the fenders.

another dry-fit just to check before cementing the fenders to the lower hull.

The heavy Panzerspähwagen was a large and ungainly but very fast addition to the German mobile arsenal of the early war years. The original 6-rad (6 wheeled) versions were based on a 6x4 truck with armoured body, but by 1937 they were being replaced by the 8-rad versions. During the replacement, the Sd.Kfz numbers were carried directly over; differentiation is made by the addition of 6-Rad or 8-Rad (Ger: "6 wheel" or "8 wheel") in the vehicle name.

These vehicles first saw combat with the campaign against Poland and in the Battle of France. The radio communication cars proved their ability in infantry support, especially during street fighting. Later they saw use in both the USSR and North Africa. Extreme climatic conditions in both these areas proved too severe for the vehicle. In the USSR, adverse ground conditions immobilized 150 Sd.Kfz 232s during the first wet season of the campaign. In the desert, heat and sand created some maintenance problems. Still, the eight-wheeled cars turned out to be the best vehicles that Rommel had for long range reconnaissance across the wide desert territory.

from: Wikipedia

Contents:

Tamiya first released the Schwerer Panzerspähwagen 8-Rad Sd.Kfz.232 (kit #35036) back in 1974 and was quite a detailed kit for its day with separate suspension components and nicely done hull/turret details.

from: www.perthmilitarymodelling.com

--------------------------------------------------------------------------------------------

ASSEMBLY:

here's the transmission and leaf springs. lots of mold lines that still needs to be trimmed.

construction of the suspensions.

also assembled the wheels and underguard.

fixed all the components of the lower hull and hatches.